Friday, July 19, 2013
Impressive For The Price! Reviews Ramsond RMM4 2-in-1 Air Hardwood Flooring Cleat Nailer and Stapler Gun
This one nails and staples. As a weekend warrior, I used the Ramsond RMM4 2-in-1 Air Hardwood Flooring to
install 1500 square feet of standard 2 1/2" oak strip flooring in two
weekend. Putting L-cleats in strand bamboo with no trouble. Just make sure you
put on the correct plastic foot plate for the thickness of your floor
board, the one that was installed from the factory is for 3/4" to 25/32"
flooring and most flooring in in the 1/2" to 5/8" range, had to change
the plate and she works like a charm.
It's really solidly built and balanced really nicely. Ok the bottome line is you get what you pay for right? Right! This Ramsond RMM4 2-in-1 Air Hardwood Flooring is not expensive by no means but it does what it
claims it could do. The Ramsond could use some design improvements to allow the user to
nail closer to a wall and I'd like to see a safety lever on the handle.
Other than that it was money well spent and I'd recommend this tool to
anyone. Oh, it comes with a decent case too.
Outstanding! Reviews Freeman PFL618BR 3-in-1 Pneumatic Flooring Nailer
I just finished installing 1100 square feet of 3/4 inch oak flooring
using this Freeman PFL618BR 3-in-1 Pneumatic Flooring Nailer. It worked great! I had never heard of Freeman before and bought this flooring nailer
based on reviews & price. I had a couple of false starts trying to
get the first couple of rows straight, but one that was figured out no
problems. Never could have done it without this nailer.
No misfires or hung up nails
(except for a couple when I didn't strike the tool properly). I used L
cleats so I can't verify how the other type of fasteners would work in
this Freeman PFL618BR 3-in-1 Pneumatic Flooring Nailer gun. As a previous reviewer stated, this makes a lot more economic
sense than renting a nailer. I paid Amazon $190, which I think is a
smokin deal!
Thursday, July 18, 2013
Very... Awesome!Reviews NuMax SFL618BR 3-in-1 Pneumatic Flooring Stapler/Nailer with White Rubber Mallet
The NuMax SFL618BR 3-in-1 Pneumatic Flooring Stapler/Nailer worked great. Just completed 1500 sq. ft.
without any major problems. I oiled it before each usage. Worked like a
charm. At this price it was an easy choice to buy vs. rent. The tool has
worked very well. I used the oil it came with in the air intake as you
normally would to oil an air tool.
The nailer seemed well built with a good amount of heft. Included are an
additional shoe for 1/2" flooring, hex key, handle and a wrench for
tightening the handle to the nailer. I have run through about 4 boxes
(4000) of nails and haven't had one misfire, except for the occasional
user error. The only problem was the rubber sleeve on the handle kept on
slipping off but not a big concern. Great tool great price.